Valentine's Day Gifts

Advertisement: Jewelry, Medical Supplies and Equipment
Coronavirus Updates, Luxury Eyewear
Tools and Fashion Accessories, Cell Phone and Accessories
Outdoor and Sports Fitness, Medical Supplies and Equipment

Showing posts with label Electrical power generator. Show all posts
Showing posts with label Electrical power generator. Show all posts

Tuesday, January 18, 2011

Rural electrification

Rural electrification is the process of bringing electrical power to rural and remote areas. Electricity is used not only for lighting and household purposes, but it also allows for mechanization of many farming operations, such as threshing, milking, and hoisting grain for storage; in areas facing labor shortages, this allows for greater productivity at reduced cost. One famous program was the New Deal's Rural Electrification Administration in the United States, which pioneered many of the themes still practiced in other countries. According to IEA (2009) worldwide 1.456 billion people do not have access to electricity, of which 83% live in rural areas. In Sub-Saharan Africa only 12% of the rural population has access to electricity. Worldwide rural electrification progresses only slowly. The IEA estimates that—if current trends do not change—the number of people without electricity will fall to 1.2 billion by the year 2030. Due to high population growth the number of people without electricity is expected to rise in Sub-Saharan Africa.

Rural electrification Benefits

In impoverished and undeveloped areas, small amounts of electricity can free large amounts of human time and labor. In the poorest areas, people carry water and fuel by hand, their food storage may be limited, and their activity is limited to daylight hours.
Adding electric-powered wells for clean water can prevent many water-borne diseases, e.g. dysentery, by reducing or eliminating direct contact between people (hands) and the water supply. Refrigerators increase the time that food can be stored, potentially reducing hunger, while evening lighting can lengthen a community's daylight hours.

Rural electrification Drawbacks

Depending on the source, rural electrification (and electricity in general) can bring problems as well as solutions. New power plants may be built, or existing plant's generation capacity increased to meet the demands of the new rural electrical users. A government may be inclined to use the cheapest generation source, which may be highly pollutive, and locate the power plant next to vulnerable minorities or rural areas. However, renewable energy is ever more imposing itself as not only clean but also cost effective technology for remote rural areas.

Rural electrification Technology

One of the least expensive, most reliable, and best proven mains electricity distribution systems for rural electrification is single wire earth return. This system is widely used in countries such as Australia with very low populations densities. Also, there are some geographical requirements necessary for its use. There are many instance where these two systems are used together in the same system to serve remote and less remote rural populations.
Since modern power distribution networks can cheaply include optic fibres in the centre of one of the wires, telephone and internet service may become available with rural electrification.
Locally generated renewable energy is an efficient technology, particularly compared to electrification with diesel generators. In some countries (particularly Bangladesh and India) hundreds of thousands of Solar Home Systems have been installed in the last years. The deployment of these systems is coupled with microfinance schemes, such as Grameen Shakti. Most of these systems provide electricity for lighting and some small appliances (radio, TV). Mini-grids (central generation and village wide distribution network) can be a more potent alternative to energy home systems since they can provide capacity for the productive use of electricity (small businesses). Hybrid mini-grids (renewables combined with diesel generators) are a widely acknowledged technology for rural electrification in developing countries.

Continental and national initiatives

Rural electrification in Brazil
In 1981, 74.9% of Brazilian households were served by electric power, according to the IBGE's PNAD survey. In 2000, the Brazilian Federal Government, under the Fernando Henrique Cardoso administration, launched the Luz no Campo program to expand the distribution of electricity in Brazilian domiciles, with a focus on rural households; from 2003 on, the program was reinforced and renamed Luz para Todos by the Lula administration. The results are as follows, according to the PNAD: by 1996, 79.9% of all households had access to an electric power supply; that proportion rose to 90.8% in 2002 and 98.9% in 2009.

Rural electrification in China
China launched the China Township Electrification Program in 2001 to provide renewable electricity to 1,000 townships, one of the largest such programs in the world. This is being followed by the China Village Electrification Program, also using renewable energy, aimed at electrification of a further 3.5 million households in 10,000 villages by 2010, to be followed by full rural electrification by 2015.

Rural electrification in India
400 million Indians have no access to electricity.
The problem is not one of distribution, but of provision. Many people attempt to steal electric power. The electric company then responds with punitive "tampering tariffs" that require payment for all the electricity that the fraudulent connections and meters might have stolen. These very high tariffs are unaffordable, resisted by all but the wealthiest users. The result is that the underfunded electric power company reduces service to the amount of electricity it can afford to produce. The electric companies therefore also prefer to serve large institutional customers that pay their bills.
Developments on cheap solar technology is considered as a potential alternative that allows an electricity infrastructure comprising of a network of local-grid clusters with distributed electricity generation. That could allow bypassing, or at least relieving the need of installing expensive, and lossy, long-distance centralised power delivery systems and yet bring cheap electricity to the masses.
The government has proposed legislation to have village leaders operate local generators run from biomass (see links). Locally-controlled generation is preferable to distant generation because the fuel, billing and controls for the generator will then be controlled by the villagers themselves, and they are thought more likely to come to an equitable arrangement among themselves.
However, there is doubt that villagers can run such an installation.

Rural electrification in European Union
In Europe exists the Alliance for Rural Electrification (ARE), an international non-profit organization founded in 2006. ARE promotes the use of renewable energy in developing countries. ARE is partner of the United Nations Global Compact and the European Union Sustainable Energy Campaign.

Rural electrification in Ireland
During the 1930s most towns in Ireland were connected to the grid but the outbreak of World War II in Europe lead to shortages of fuel and materials which brought the process to a virtual halt until the early 1950s when the Rural Electrification scheme gradually brought electric power to the countryside a process that was completed on the mainland in 1973 (but it wasn't until 2003 that the last of the inhabited offshore islands were fully connected). Currently the Rural Electrification scheme continues but is primarily concerned with upgrading the quality of the network (voltage fluctuations are still a problem in parts of Ireland -particularly in rural areas) and making three phase supplies available to larger farms and rural businesses requiring it.

Rural electrification in United States
In 1892, Guy Beardslee, the original owner of Beardslee Castle, was paid $40,000 to provide hydroelectric power to East Creek in New York.
Despite widespread electricity in cities, by the 1920s electricity was not delivered by power companies to rural areas because of the general belief that the infrastructure costs would not be recouped. In sparsely-populated farmland, there were far fewer houses per mile of installed electric lines. A Minnesota state committee was organized to carry out a study of the costs and benefits of rural electrification.  The University of Minnesota Department of Biosystems and Agricultural Engineering, working jointly with NSP (now Xcel Energy), conducted an experiment, providing electricity to nine farms in the Red Wing area. Electricity was first delivered on December 24, 1923. The "Red Wing Project" was successful- the power company and the University concluded that rural electrification was economically feasible. The results of the report were influential in the National government's decision to support rural electrification.
Before 1936, a small but growing number of farms installed small wind-electric plants. These generally used a 40V DC generator to charge batteries in the barn or the basement of the farmhouse. This was enough to provide lighting, washing machines and some limited well-pumping or refrigeration. Wind-electric plants were used mostly on the great plains, which have usable winds on most days.
Of the 6.3 million farms in the United States in January 1925, only 205,000 were receiving centralized electric services. The Rural Electrification Administration (REA) was created by executive order as an independent federal bureau in 1935, authorized by the United States Congress in the 1936 Rural Electrification Act, and later in 1939, reorganized as a division of the U.S. Dept. of Agriculture. It was charged with administering loan programs for electrification and telephone service in rural areas. Between 1935 and 1939 – or the first 4 ½ years after REA's establishment, the number of farms using electric services more than doubled.
The REA undertook to provide farms with inexpensive electric lighting and power. To implement those goals the administration made long-term, self-liquidating loans to state and local governments, to farmers' cooperatives, and to nonprofit organizations; no loans were made directly to consumers. In 1949 the REA was authorized to make loans for telephone improvements; in 1988, REA was permitted to give interest-free loans for job creation and rural electric systems. By the early 1970s about 98% of all farms in the United States had electric service, a demonstration of REA's success. The administration was abolished in 1994 and its functions assumed by the Rural Utilities Service. Also, the Tennessee Valley Authority is an agency involved in rural electrification.

Rural electrification in Jamaica
The Rural Electrification Programme (REP) was incorporated in 1975 with the specific mandate to expand the reach of electricity supply to rural areas, where the provision of such services would not be economically viable for commercial providers of electricity. The REP extends the national grid through the construction of electrical distribution pole lines to un-electrified areas and provides house wiring assistance through a loan programme to householders.

In the arts

Rural electrification Musicals
In 2005, a musical about the rural electrification of Ireland, The Wiremen, written by composer Shay Healy, directed by Matt Ryan with musical direction by Julian Kelly, and produced by John McColgan/Moya Doherty of Riverdance fame, ran for six weeks at The Gaiety Theatre, Dublin. Set in the fictional village of Kilnacree in North Mayo, the story had the drama of a young local farmer resisting progress, set against the comedy and upheaval occasioned by the arrival of The Wiremen, in this case seven Dubliners, known as The Lightning Jacks.

Rural electrification in Films
The movie O Brother, Where Art Thou? contains a reference to rural electrification in the end, when the main character Everett (George Clooney) talks about how life will change with the introduction of a hydroelectric dam.
The 1937 movie Slim (based on the novel by William Wister Haines) starring Henry Fonda salutes the linemen who wired the remote parts of the United States for electric power during the 1930s and realistically details many of the dangers they faced climbing towers and working on energized high-voltage equipment. The movie is shown occasionally on Turner Classic Movies and is said to have been one of Henry Fonda's favorite roles. The beginning of the film contains a montage tribute to the men who pioneered the electric power industry and contains scenes from REA documentaries describing the electrification of America.


(source:wikipedia)

Sunday, January 16, 2011

Electrical power generator



U.S. NRC image of a modern steam turbine generator

In electricity generation, an electric generator is a device that converts mechanical energy to electrical energy. The reverse conversion of electrical energy into mechanical energy is done by a motor; motors and generators have many similarities. A generator forces electrons in the windings to flow through the external electrical circuit. It is somewhat analogous to a water pump, which creates a flow of water but does not create the water inside. The source of mechanical energy may be a reciprocating or turbine steam engine, water falling through a turbine or waterwheel, an internal combustion engine, a wind turbine, a hand crank, compressed air or any other source of mechanical energy.




Early 20th century alternator made in Budapest, Hungary, in the power generating hall of a hydroelectric station

Generator in Zwevegem, West Flanders,Belgium


Before the connection between magnetism and electricity was discovered, electrostatic generators were invented that used electrostatic principles. These generated very high voltages and low currents. They operated by using moving electrically charged belts, plates and disks to carry charge to a high potential electrode. The charge was generated using either of two mechanisms:
Electrostatic induction
The triboelectric effect, where the contact between two insulators leaves them charged.
Because of their inefficiency and the difficulty of insulating machines producing very high voltages, electrostatic generators had low power ratings and were never used for generation of commercially significant quantities of electric power. The Wimshurst machine and Van de Graaff generator are examples of these machines that have survived.

Jedlik's dynamo
Main article: Jedlik's dynamo
In 1827, Hungarian Anyos Jedlik started experimenting with electromagnetic rotating devices which he called electromagnetic self-rotors. In the prototype of the single-pole electric starter (finished between 1852 and 1854) both the stationary and the revolving parts were electromagnetic. He formulated the concept of the dynamo at least 6 years before Siemens and Wheatstone but didn't patent it as he thought he wasn't the first to realize this. In essence the concept is that instead of permanent magnets, two electromagnets opposite to each other induce the magnetic field around the rotor. It was also the discovery of the principle of self-excitation.

Faraday's disk


Faraday disk, the first electric generator. The horseshoe-shaped magnet (A) created a magnetic field through the disk (D). When the disk was turned this induced an electric current radially outward from the center toward the rim. The current flowed out through the sliding spring contact m, through the external circuit, and back into the center of the disk through the axle.

In the years of 1831–1832, Michael Faraday discovered the operating principle of electromagnetic generators. The principle, later called Faraday's law, is that a potential difference is generated between the ends of an electrical conductor that has a varying magnetic flux. He also built the first electromagnetic generator, called the Faraday disk, a type of homopolar generator, using a copper disc rotating between the poles of a horseshoe magnet. It produced a small DC voltage.
This design was inefficient due to self-cancelling counterflows of current in regions not under the influence of the magnetic field. While current was induced directly underneath the magnet, the current would circulate backwards in regions outside the influence of the magnetic field. This counterflow limits the power output to the pickup wires and induces waste heating of the copper disc. Later homopolar generators would solve this problem by using an array of magnets arranged around the disc perimeter to maintain a steady field effect in one current-flow direction.
Another disadvantage was that the output voltage was very low, due to the single current path through the magnetic flux. Experimenters found that using multiple turns of wire in a coil could produce higher more useful voltages. Since the output voltage is proportional to the number of turns, generators could be easily designed to produce any desired voltage by varying the number of turns. Wire windings became a basic feature of all subsequent generator designs.

Dynamo
Main article: Dynamo



Dynamos are no longer used for power generation due to the size and complexity of the commutator needed for high power applications. This large belt-driven high-current dynamo produced 310 amperes at 7 volts, or 2,170 watts, when spinning at 1400 RPM.

Dynamo Electric Machine [End View, Partly Section] (U.S. Patent 284,110)
The dynamo was the first electrical generator capable of delivering power for industry. The dynamo uses electromagnetic principles to convert mechanical rotation into a pulsing direct electric current through the use of a commutator. The first dynamo was built by Hippolyte Pixii in 1832.

Through a series of accidental discoveries, the dynamo became the source of many later inventions, including the DC electric motor, the AC alternator, the AC synchronous motor, and the rotary converter.
A dynamo machine consists of a stationary structure, which provides a constant magnetic field, and a set of rotating windings which turn within that field. On small machines the constant magnetic field may be provided by one or more permanent magnets; larger machines have the constant magnetic field provided by one or more electromagnets, which are usually called field coils.
Large power generation dynamos are now rarely seen due to the now nearly universal use of alternating current for power distribution and solid state electronic AC to DC power conversion. But before the principles of AC were discovered, very large direct-current dynamos were the only means of power generation and distribution. Now power generation dynamos are mostly a curiosity.

Other rotating electromagnetic generators
Without a commutator, a dynamo becomes an alternator, which is a synchronous singly-fed generator. When used to feed an electric power grid, an alternator must always operate at a constant speed that is precisely synchronized to the electrical frequency of the power grid. A DC generator can operate at any speed within mechanical limits but always outputs a direct current waveform.
Other types of generators, such as the asynchronous or induction singly-fed generator, the doubly-fed generator, or the brushless wound-rotor doubly-fed generator, do not incorporate permanent magnets or field windings (i.e., electromagnets) that establish a constant magnetic field, and as a result, are seeing success in variable speed constant frequency applications, such as wind turbines or other renewable energy technologies.
The full output performance of any generator can be optimized with electronic control but only the doubly-fed generators or the brushless wound-rotor doubly-fed generator incorporate electronic control with power ratings that are substantially less than the power output of the generator under control, which by itself offer cost, reliability and efficiency benefits.

MHD generator
Main article: MHD generator
A magnetohydrodynamic generator directly extracts electric power from moving hot gases through a magnetic field, without the use of rotating electromagnetic machinery. MHD generators were originally developed because the output of a plasma MHD generator is a flame, well able to heat the boilers of a steam power plant. The first practical design was the AVCO Mk. 25, developed in 1965. The U.S. government funded substantial development, culminating in a 25 MW demonstration plant in 1987. In the Soviet Union from 1972 until the late 1980s, the MHD plant U 25 was in regular commercial operation on the Moscow power system with a rating of 25 MW, the largest MHD plant rating in the world at that time. MHD generators operated as a topping cycle are currently (2007) less efficient than combined-cycle gas turbines.

Terminology


Rotor from generator at Hoover Dam,United States
The two main parts of a generator or motor can be described in either mechanical or electrical terms:

Mechanical:
Rotor: The rotating part of an electrical machine
Stator: The stationary part of an electrical machine
Electrical:
Armature: The power-producing component of an electrical machine. In a generator, alternator, or dynamo the armature windings generate the electric current. The armature can be on either the rotor or the stator.
Field: The magnetic field component of an electrical machine. The magnetic field of the dynamo or alternator can be provided by either electromagnets or permanent magnets mounted on either the rotor or the stator.
Because power transferred into the field circuit is much less than in the armature circuit, AC generators nearly always have the field winding on the rotor and the stator as the armature winding. Only a small amount of field current must be transferred to the moving rotor, using slip rings. Direct current machines (dynamos) require a commutator on the rotating shaft to convert the alternating current produced by the armature to direct current, so the armature winding is on the rotor of the machine.

Excitation


A small early 1900s 75 KVA direct-driven power station AC alternator, with a separate belt-driven exciter generator.

An electric generator or electric motor that uses field coils rather than permanent magnets requires a current to be present in the field coils for the device to be able to work. If the field coils are not powered, the rotor in a generator can spin without producing any usable electrical energy, while the rotor of a motor may not spin at all.
Smaller generators are sometimes self-excited, which means the field coils are powered by the current produced by the generator itself. The field coils are connected in series or parallel with the armature winding. When the generator first starts to turn, the small amount of remanent magnetism present in the iron core provides a magnetic field to get it started, generating a small current in the armature. This flows through the field coils, creating a larger magnetic field which generates a larger armature current. This "bootstrap" process continues until the magnetic field in the core levels off due to saturation and the generator reaches a steady state power output.
Very large power station generators often utilize a separate smaller generator to excite the field coils of the larger. In the event of a severe widespread power outage where islanding of power stations has occurred, the stations may need to perform a black start to excite the fields of their largest generators, in order to restore customer power service.

DC Equivalent circuit

Equivalent circuit of generator and load.
G = generator
VG=generator open-circuit voltage
RG=generator internal resistance
VL=generator on-load voltage
RL=load resistance
The equivalent circuit of a generator and load is shown in the diagram to the right. The generator's VG and RG parameters can be determined by measuring the winding resistance (corrected to operating temperature), and measuring the open-circuit and loaded voltage for a defined current load.

Vehicle-mounted generators

Early motor vehicles until about the 1960s tended to use DC generators with electromechanical regulators. These have now been replaced by alternators with built-in rectifier circuits, which are less costly and lighter for equivalent output. Automotive alternators power the electrical systems on the vehicle and recharge the battery after starting. Rated output will typically be in the range 50-100 A at 12 V, depending on the designed electrical load within the vehicle. Some cars now have electrically-powered steering assistance and air conditioning, which places a high load on the electrical system. Large commercial vehicles are more likely to use 24 V to give sufficient power at the starter motor to turn over a large diesel engine. Vehicle alternators do not use permanent magnets and are typically only 50-60% efficient over a wide speed range. Motorcycle alternators often use permanent magnet stators made with rare earth magnets, since they can be made smaller and lighter than other types. See also hybrid vehicle.
Some of the smallest generators commonly found power bicycle lights. These tend to be 0.5 ampere, permanent-magnet alternators supplying 3-6 W at 6 V or 12 V. Being powered by the rider, efficiency is at a premium, so these may incorporate rare-earth magnets and are designed and manufactured with great precision. Nevertheless, the maximum efficiency is only around 80% for the best of these generators—60% is more typical—due in part to the rolling friction at the tyre–generator interface from poor alignment, the small size of the generator, bearing losses and cheap design. The use of permanent magnets means that efficiency falls even further at high speeds because the magnetic field strength cannot be controlled in any way. Hub generators remedy many of these flaws since they are internal to the bicycle hub and do not require an interface between the generator and tyre. Until recently, these generators have been expensive and hard to find. Major bicycle component manufacturers like Shimano and SRAM have only just entered this market. However, significant gains can be expected in future as cycling becomes more mainstream transportation and LED technology allows brighter lighting at the reduced current these generators are capable of providing.
Sailing yachts may use a water or wind powered generator to trickle-charge the batteries. A small propeller, wind turbine or impeller is connected to a low-power alternator and rectifier to supply currents of up to 12 A at typical cruising speeds.

Engine-generator

Main article: Engine-generator
An engine-generator is the combination of an electrical generator and an engine (prime mover) mounted together to form a single piece of self-contained equipment. The engines used are usually piston engines, but gas turbines can also be used. Many different versions are available - ranging from very small portable petrol powered sets to large turbine installations.

Human powered electrical generators

A generator can also be driven by human muscle power (for instance, in field radio station equipment).
Human powered direct current generators are commercially available, and have been the project of some DIY enthusiasts. Typically operated by means of pedal power, a converted bicycle trainer, or a foot pump, such generators can be practically used to charge batteries, and in some cases are designed with an integral inverter. The average adult could generate about 125-200 watts on a pedal powered generator. Portable radio receivers with a crank are made to reduce battery purchase requirements, see clockwork radio.
Linear electric generator

In the simplest form of linear electric generator, a sliding magnet moves back and forth through a solenoid - a spool of copper wire. An alternating current is induced in the loops of wire by Faraday's law of induction each time the magnet slides through. This type of generator is used in the Faraday flashlight. Larger linear electricity generators are used in wave power schemes.

Tachogenerator

Tachogenerators are frequently used to power tachometers to measure the speeds of electric motors, engines, and the equipment they power. Generators generate voltage roughly proportional to shaft speed. With precise construction and design, generators can be built to produce very precise voltages for certain ranges of shaft speeds


(source:wikipedia)